Larson has a tradition of backing its boats with a strong warranty. They exceed consumer confidence with dependable products and great value, and they maintain consumer loyalty by backing it up with their industry leading limited warranty.

When comparing warranties with other brands, make sure you are looking at details.

When you need service, will other companies match this?

• Towing, Dockside Assistance, Blocking and Hoist Allowances
• Trolling motors
• Trailer components
• Entertainment systems (TV’s, Stereos, DVD’s, VCR’s, Amplifiers, AM/FM tuners)
• Factory or dealer installed equipment covered
• Wakeboard towers
• Electronics (GPS, Depth and fish finders, navigation equipment including radar)
• Hardware - right down to your cleats
• Electrical components (Gauges, switches, lights, wiper and blower motor, bilge, livewell pumps and much more)
• LIFETIME LIMITED WARRANTY
• The purchase of any Larson boat includes a structural Hull Lifetime Limited Warranty. Coverage that is transferable to a second owner, enhancing resale value.

OSMOTIC HULL BLISTER LIMITED WARRANTY
Five year coverage against hull blistering caused by osmosis. No declining pro-rate per year like some competitors - Larson covers repair costs for 5 years.

Coverage:
Engine includes (outboard and diesel engines not included) : Closed Cooling System, V-drive or Outdrive Lower Unit and Upper Gear Unit, Power Trim System, Electrical System and Seals and Gaskets and more.

Trailer includes: Brakes, drums, master cylinder, Hydraulic brake actuator, frame rails, wheel bearings, spindles, springs, winch stand, welds, axle, lugs, backing plates, coupler, bunks and/or roller cradles.

Larson Sport Boats includes: Digital depth finder, Fish finder, stereos and CD player, any built-in Appliances, Instrument panel, Remote Spotlight, Controls, Hydraulic Steering, Ski and Wakeboard tower, Fresh Water System, Electrical and Heating, Wireless Communication System, Electrical Trolling Motor, Any Boat Electrical and more.†

Additional Benefits:

• Hoist Lift Out/In - up to $100 per occurrence for cruiser repairs.
• Towing Provisions - up to $100 per occurrence with no deductible.
• Dockside Assistance - covers up to $50 per service call when on the water repair is needed.
• Blocking - fees up to $50 per occurrence covered if mechanical breakdown occurs with no deductible.

For the first two years, should you have any issues, Larson’s all component coverage is in place for your boat, engine and trailer. The continuing coverage listed above begins the 3rd year you own your boat. For 5 full years, you won’t have a gap in coverage. We’ll make it as easy as flipping a switch - did we mention those are covered too?

For a full list of all items and applicable conditions and limits, see your authorized Larson dealer. Available in the United States and Canada only. Standard 2-year all component coverage for boat and engine applies to all models shipped internationally.

* First 2-years covered under Larson standard limited warranty, remaining 3-years covered under Larson’s extended service plan issued by FPC. For all models produced after 9.15.06.

** Hull, deck, stringers, floors and transom covered by a Lifetime Limited Warranty on all VEC models of 2007 boats. Structural hull only coverage applies to non-VEC models.

† Items must be factory or dealer installed.
(close)

---

VEC^® Unitized Construction
Virtual Engineered Composites, or VEC, is a patented, proven process that allows for efficiency and precision unobtainable by traditional fiberglass molding techniques. The VEC process replaces the traditional open-molding process with a computer-monitored, closed-mold system that produces complex fiberglass parts of defined thickness and strength.

For 2007, we’re introducing a new application of VEC,
called VEC Unitized Construction. This process produces a hull that incorporates the stringer, floor, transom and hull in a single, unitized part. As a result, the unitized hull is structurally stronger and more durable than a hull supported by a separate fiberglass or wood stringer and multiple parts. It also produces smooth surfaces in the engine compartment and within storage areas, without the need for a separate pan or liner.

The precision of the VEC process enhances the consistency of the running surface and hull weight for better performance and fuel efficiency. The boat feels exceptionally solid in rough water, so handling stays true.

Vibration and rattles are virtually eliminated for a smoother, quieter ride. And since the boat is manufactured with more precision, other parts like seats and windshields can be made with tighter tolerances for a better fit and long-lasting durability.

Larson is confident with the integrity of VEC Unitized Construction; so confident in fact, a boat hull manufactured with VEC receives a lifetime imited warranty - just like ALL Larson boats do.*

* Hull, deck, stringers, floors and transom covered by a Lifetime Limited Warranty on all VEC models of 2007 boats. Structural hull only coverage applies to non-VEC models.

(close)

---